Key Hose - Eco-10 Lightweight Attack Hose

← Slide to view entire chart →

Diameter	Part No.	Service Test	Proof Test	Burst Test	Bowl Size	Weight Uncoupled
**1½"	DP15-800-ECO	400 psi	800 psi	1200 psi	1¹⁵⁄16"	0.23 lbs/ft
*1¾"	DP17-800-ECO	400 psi	800 psi	1200 psi	2¹⁄16"	0.28 lbs/ft
**2½"	DP25-800-ECO	400 psi	800 psi	1200 psi	3"	0.42 lbs/ft
*3"	DP30-800-ECO	400 psi	800 psi	1200 psi	3³⁄8"	0.56 lbs/ft

*UL Listed to 400 psi | **UL Listed to 400 psi and FM Approved

Double jacket construction is tightly woven with filament polyester yarn in the filler and ring spun polyester yarn in the warp of both the inside and outside jackets. Double jackets encapsulate a rubber lining consisting of single-ply extruded tube of synthetic high tensile EPDM compounded that is ozone resistant.
Eco-10 hose may be woven with a double tracer stripe for ease in identification and twist.
Available with a special “Key-Lok” polyurethane based polymer impregnation for enhanced color and added abrasion resistance.
Eco-10 can be coupled with 6061-T6 aluminum threaded couplings or forged Storz. Brass, special threads or other custom features available upon request. Barcode recess available at additional charge.
The minimum burst test pressure when tested in accordance to NFPA 1961 on all Eco-10 hose shall be 1200 psi / 82 bar. Service test pressures stenciled on the hose shall be in accordance with current minimum requirements of NFPA 1962.
Eco-10 hose meets and exceeds all performance requirements of NFPA 1961 and Underwriters Laboratories latest edition standards.

Lightweight